SCHNEIDER TRUCK YARD PROJECT PROFILE
C&R Fence installed automated cantilever slide gates, access control pedestals and security fencing for a Schneider truck yard in Central California. The new entry gives the facility a controlled point of entry for tractors, trailers and staff vehicles, and keeps the yard secured around the clock.
The galvanized chain link gates are topped with barbed wire to match the surrounding perimeter fence. A LiftMaster slide gate operator drives them, and access control pedestals at the approach let authorized drivers open the gates without leaving the cab. Heavy galvanized bollards protect the gate posts, operator and pedestals from truck impact.
Project Features
- Galvanized cantilever slide gates
- LiftMaster slide gate operator
- Access control pedestals at the vehicle approach
- Galvanized chain link fencing
- Three-strand barbed wire security top
- Heavy-duty galvanized protective bollards
- In-pavement vehicle detection loops
- Gate safety warning signage
Gate Automation for Trucking & Logistics Yards
Truck yards run around the clock, with tractors and trailers coming and going at all hours. The entry gate needs to open quickly for authorized drivers, close securely behind them, and stand up to heavy equipment day after day.
For this Schneider facility, C&R Fence built a gated entry around that workflow. Drivers pull up to an access control pedestal, the operator opens the gate, and vehicle detection loops in the pavement help the gate sense when a truck has cleared the opening before it closes.
Why Cantilever Gates for Truck Yards?
Cantilever gates hang from roller assemblies mounted on the gate posts, so nothing runs across the driveway. For a truck yard, that means:
- No ground track to crack or bend under loaded trailers
- No track to clog with gravel, dirt or debris
- Reliable operation in all weather
- A clear, level entry for tractors and trailers
Built to Handle Heavy Traffic
Large trucks make tight turns, and gate equipment near a truck entry takes a beating. C&R Fence set heavy galvanized bollards at the gate posts, operator and pedestals so a misjudged turn hits a bollard instead of the gate system. That keeps the entry running and cuts down on repair calls.
Benefits of This Gate System
- Controlled, around-the-clock access for authorized vehicles
- Drivers can open the gate without leaving the cab
- No ground track to damage under heavy trucks
- Vehicle detection helps the gate close safely behind traffic
- Bollards protect equipment from truck impact
- Barbed wire perimeter deters intrusion and theft
- Galvanized materials resist rust and weather
Commercial Gate & Fence Contractor for Logistics Facilities
C&R Fence provides cantilever gates, slide gates, gate operators, access control and security fencing for trucking terminals, distribution centers, warehouses, industrial yards and commercial properties in Stockton, Lathrop, Tracy, Modesto and throughout the Central Valley.
Whether a site needs a new automated truck entry, an operator upgrade or a full secure perimeter, C&R Fence can design and install a system around the facility’s security and traffic needs.
CR Fence provides commercial and industrial fencing services throughout Sacramento and surrounding Northern California areas. Our team installs ornamental iron fencing, chain link fencing, security fencing, access control systems, gates, and perimeter barriers for warehouses, manufacturing facilities, logistics properties, and commercial sites.
If you are looking for a commercial gate and fence contractor for a trucking or logistics facility in the Central Valley, contact CR Fence to discuss your next project.
FREQUENTLY ASKED QUESTIONS
- What did C&R Fence install at the Schneider truck yard?
C&R Fence installed automated galvanized cantilever slide gates with a LiftMaster operator, access control pedestals, protective bollards and barbed wire chain link fencing.
- Why are cantilever gates a good fit for truck yards?
Cantilever gates have no ground track, so loaded trucks can’t damage them and dirt and debris can’t clog them. That makes them reliable for heavy, high-volume traffic.
- What are vehicle detection loops?
Vehicle detection loops are wire sensors cut into the pavement that detect when a vehicle is over them. They help an automatic gate open for exiting traffic and keep it from closing on a vehicle still in the opening.
- Why install bollards at a gate entry?
Bollards protect gate posts, operators and access control equipment from being hit by trucks. That’s one of the most common causes of gate system damage at logistics facilities.
- Does C&R Fence install access control systems?
Yes. C&R Fence installs access control pedestals, keypads, card readers and gate operators for trucking yards, warehouses and other commercial properties throughout the Central Valley.