KERSH PROJECT PROFILE

C&R Fence installed an automated cantilever slide gate and high-security perimeter fencing for the Kersh project in Central California. The gate is galvanized chain link with a barbed wire top. It’s driven by a DoorKing slide gate operator mounted on a raised galvanized base, and steel bollards protect the operator from vehicle impact.

A cantilever gate rides on roller assemblies mounted to the gate posts rather than on a track in the ground. The opening stays clear of tracks and debris, which makes it a dependable choice for industrial sites with heavy trucks, dirt and frequent traffic.

  • DoorKing slide gate operator with protective bollards at the Kersh project
  • Galvanized cantilever slide gate with DoorKing operator at sunset, Kersh project

Project Features

  • Galvanized cantilever slide gate
  • DoorKing slide gate operator
  • Raised galvanized operator mounting base
  • Protective steel bollards
  • Chain link security fencing
  • Barbed wire security top
  • Designed to work alongside an electric security fence
  • Access control pedestal at the vehicle entry

Gate Automation for Industrial Sites

Industrial facilities need a gate that can handle trucks and equipment all day while keeping the site locked down at all other times. For the Kersh project, C&R Fence paired a heavy-duty cantilever gate with a DoorKing operator, a commercial-grade system built for high-cycle use.

The operator sits on a raised base above the ground to help protect it from water and debris. Bollards on both sides guard it against vehicle strikes, which is one of the most common causes of gate operator damage at busy sites.

Why a Cantilever Slide Gate?

Cantilever gates are supported by rollers on the gate posts, so nothing touches the ground across the opening. That means:

  • No ground track to clog with dirt, gravel or debris
  • No track to damage under heavy truck traffic
  • Smooth, reliable operation in all weather
  • A clear, level driveway for vehicles and equipment

Layered Perimeter Security

The gate is part of a layered security perimeter. Chain link fencing with barbed wire makes the boundary hard to cross, and an electric security fence along the perimeter adds a strong deterrent. An access control pedestal at the entry lets authorized drivers open the gate without leaving their vehicle.

Benefits of This Gate System

  • Automated access for trucks and authorized vehicles
  • No ground track to maintain or clear
  • Bollards protect the operator from vehicle damage
  • Raised base helps protect the operator from water and debris
  • Barbed wire and electric fencing deter intrusion
  • Galvanized materials resist rust and weather
  • Built for high-cycle industrial use

Commercial Fence Installation in Sacramento

C&R Fence provides cantilever gates, slide gates, gate operators, access control and high-security fencing for industrial facilities, utilities, storage yards, agricultural operations and commercial properties in Stockton, Modesto, Lodi, Turlock and throughout the Central Valley.

Whether a site needs a new automated vehicle gate, an operator upgrade or a full high-security perimeter, C&R Fence can design and install a system around the property’s security and access needs.

If you are looking for a commercial fence contractor in Central CA, contact CR Fence to discuss your next project.

FREQUENTLY ASKED QUESTIONS